Dimensional Measurement Blog

As technology in our world progresses exponentially, the demand for more precise measurement requirements grows as the components manufactured within these products become smaller and smaller. If you are manufacturing products with extremely small dimensional measurements, you may need to consider nano-measurement technology in order to ensure that your products are meeting the tight tolerances required in today's precision driven world.

How Small Can Nano Measurements Be?

Measurements in the billionths of a meter are considered to be nano scale. In order to maintain accurate measurements at the nano scale, it is important to know that you have the right equipment to meet your needs. A useful rule of thumb for evaluating a solution is that the measurement equipment's accuracy should be 10 times better than the dimension you intend to measure.

Since there are generally two main methods of performing nano measurements, you may find that you need to perform a trade-off between the accuracy of the measurements and the speed at which they are acquired to find the best fit equipment for your unique situation. When measuring at this small of a scale, understanding what you need from your measurement results is the first step in the process of choosing the solution for your application.

What Are the Types of Nano Measurement Technology?

In general, there are two main types of nano measurement equipment, contact based and non-contact based; each with its own advantages to consider based on the application it will be used for. Non-contact based techniques use light to measure the surface characteristics of a part, and typically provide a much faster measurement because they do not need to physically come into contact with the part being measured. There is also no risk that a small part will be moved or damaged during measurement with a non-contact based system.

By comparison, contact-based nano measurement techniques are typically better for high resolution measurements on surfaces with a high aspect ratio; such as surfaces with features like holes, slopes, steps, or sharp edges. As these contact-based nano measurement solutions have been around for some time now, they are a trusted method of inspection and provide highly accurate 2D measurement data.

How Do I Balance Cost vs. Time Expenditure?

It is no surprise that accurate inspections at the nano level are expensive and take time, but they are critical to ensure your product's success. You will need to decide if it makes more sense to purchase the equipment you need in order to perform the measurements in-house, or to rely on a trusted dimensional inspection lab to perform the measurements for you. Having your own in-house measurement solution by purchasing equipment provides the benefit of taking less time, especially for repetitive measurements. However, equipment can be costly, and training your employees may take a considerable amount of time.

Conversely, using a lab to provide your measurement information supplies you with a team of experienced specialists, performing your dimensional inspection without the outlay of purchasing equipment and maintaining costly training for your employees. These experts will very likely have greater experience than your own employees could acquire, however, the data provided from the measurements may take time depending on the lab's availability and scheduling.

Q-PLUS Labs is your dimensional metrology partner with the experience, training, and equipment necessary to ensure that your dimensional measurements, small or large, are right every time. Whether you are looking to buy the necessary dimensional measurement or surface profilometry equipment to provide your data, or you are searching for the right lab to perform complicated measurements on your behalf, Q-PLUS Labs is the right place to turn to for the advice and skills you need.

Q-PLUS Labs has been a leading dimensional measurement laboratory since 1987 and, in addition to its wide array of services and products, specializes in helping companies find the right measurement solutions to meets their needs. Contact us for answers to your dimensional and inspection measurement and inspection questions or to request a quote.

When you think about your daily life the topic of dimensional inspection will likely never come up. In fact, many people could go through their lives not understanding how dimensional inspection works, let alone how it fits into almost every aspect of their daily lives through the products they use. From the coffee cup that you may be holding right now as you read this article to the car you drive (hopefully not while you are reading this article), dimensional inspection was an integral part of the manufacturing process for all of the products you use in your daily life.

What Is Dimensional Inspection?

Simply put, dimensional inspection is the measurement of the distances between different features on a part. If you have a block that is supposed to be one inch long, then dimensional inspection will tell you exactly how long that block actually is. This is a simple case, but think about the intricate measurements required to make sure that each individual part of your car engine will fit together properly in order to move the pistons for you to be able to drive your car.

Even your simple water bottle needs to have very close dimensional measurements in order for the bottle top to screw onto the bottle and provide a tight seal for the water; if the dimensions are not correct then you may have trouble storing the bottle without spilling its contents, or even have an issue trying to fit the lid back onto it once you’ve removed it. This ability of the parts to connect correctly is designed into the dimensions of each part, but dimensional inspection of the individual parts to make sure they meet the design is what ensures the end product will work when it gets to you.

When it is not feasible to measure each dimension on each part, (for instance water bottles would become very expensive), dimensional inspection is used on the tools that make the parts such as injection molding dies that form a water bottle out of molten plastic. If the tool dies are ensured to have the right measurements, then the resulting bottles will be correct; a company can then check a sample product at intervals to make sure that the forming process is working properly as it progresses. So even then dimensional inspection is used on a sample basis.

Dimensional Inspection: 3 Surprising Facts

It should no longer surprise you that dimensional inspection is found throughout the manufacturing processes of almost every product that you use to ensure the safety and integrity of those products, but there are still some facts about dimensional inspection that you might find surprising.

Dimensional Measurements: In-House or Outsourced

While many companies keep all of the equipment they need to perform all of their dimensional inspections sometimes the equipment is so expensive, and the measurements taken so infrequently, that it makes more sense to have an expert laboratory do the measurements for you. In either case the experts at Q-PLUS are the place to turn for either help on the right equipment to purchase, or the accurate tools to measure your most intricate dimensions and the skilled operators to run that equipment.

Q-PLUS Labs has been a leading dimensional measurement laboratory since 1987; providing one place for precision measurement solutions. As a lab registered to ISO 9001 and accredited to ISO 17025, you can be certain that you will get the right dimensional measurements and calibrations every time.

With the rapid development of technology comes the greater need for the increased accuracy in measurement capabilities that are able to keep up with the pace of products being manufactured at the nano level. For precise accuracy up to the micrometer, such as 3D measurement data of a needle tip or surface roughness measured to extreme accuracy, nano measurement is the logical solution for these intricate measurements. But how do you know if it is worth your time to invest in this specific measurement solution for your application?

Of course, every measurement technique has its challenges, and with the various methods of nano measurement, there are generally three things to consider when choosing the best method for your application; specifically measurement accuracy, speed, and cost. While there are two main methods of acquiring nano measurement data, optical-based and contact-based, you will need to examine these three basic criteria when you are weighing your decision on which type of method to implement.

Accuracy of measurement

What benefit will this measurement data provide your application? To measure in the nano realm, there are two types of methods. One way is via contact-based methods of nano measurement which can give very high resolution measurements with high accuracy. This is due to the fact that they come in contact with the surface of the part being measured, so that certain features the probe comes in contact with can more easily be distinguish, and thereby measured accurately. However, parts that may become compromised if they come into direct contact with the measuring device would not be suited for this particular form of measurement.

This is only a general rule of thumb, however, as white light interferometry, a type of optical-based measurement, is one of the most accurate methods possible even though it does not come in contact with the measured unit.

Speed of measurement

If you are looking for a faster measurement solution, an optical-based method of nano measurement may be the best option, because this method uses light to take the measurement and does not physically come into contact with the surface that it is measuring. This process speeds up the collection of measurement data without the risk of surface damage, unlike what can be experienced with a probe used in the contact-based methods.

One drawback of these faster methods of measurement may be the loss of some resolution on surfaces with high aspect ratios; such as a surface with features such as steps, slopes, holes or sharp edges. These can be much more accurately measured with a contact-based method, but this will be more time consuming in order to protect the surface of the piece being measured.

Cost to measure

Of course different measurement systems will have different financial costs associated with them, and this will have to be weighed when choosing the right system to meet your needs. When making your decision on accuracy, precision, and speed you will need to keep in mind how much the measurement data will cost. Along these lines, the following are some things to consider:

While you can make some adjustments to reduce the cost per part, such as reducing the sample frequency of measurements, ensuring that you get exactly the type of measurements for the data you are looking for is one of the best ways to reduce your cost overall.

Having difficulty getting started on your measurement project? Since 1987, Q-PLUS Labs has provided a one stop solution for precision measurements to our customers. As a leading dimensional measurement laboratory, we have been able to not only supply measurement services and calibrations as needed but also consult on, specify, integrate, and sell in-house measurement solutions to meet the many and varying needs of the manufacturing industry. As a lab registered to ISO 9001 and accredited to ISO 17025, we've built our reputation on providing objective, unbiased information whether it be from our lab services department or our metrology products division.